Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
and Eu(As
P
)Onuki, Yoshichika*; Karube, Kosuke*; Aoki, Dai*; Nakamura, Ai*; Homma, Yoshiya*; Matsuda, Tatsuma*; Haga, Yoshinori; Takeuchi, Tetsuya*
Journal of the Physical Society of Japan, 92(11), p.114703_1 - 114703_12, 2023/11
Times Cited Count：0 Percentile：0(Physics, Multidisciplinary)Ariyoshi, Gen; Saruta, Koichi; Kogawa, Hiroyuki; Futakawa, Masatoshi; Maeno, Koki*; Li, Y.*; Tsutsui, Kihei*
Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.1407 - 1420, 2023/08
Cavitation damage on a target vessel due to proton beam-induced pressure waves is one of the crucial issues for the pulsed neutron source using a mercury spallation target. As a mitigation technique for the damage, the helium microbubble injection into the mercury has been carried out by using a swirl bubbler in order to utilize compressibility of bubbles. Moreover, double-walled structure, which consists of an outer wall and an inner wall, has been applied as the target head structure. In this study, we aim to develop an abnormality diagnostic technology to detect the inner wall cracking, which is caused by such cavitation damage, from the outside of the target vessel. The mercury flow fields in the case with the cracking are evaluated by computational fluid dynamics analysis based on finite element method. And then, effect of the cracking on the flow field is discussed from the point of view of the flow-induced vibration and the acoustic vibration.
Fe
intermetallic compoundCao, Y.*; Zhou, H.*; Khmelevskyi, S.*; Lin, K.*; Avdeev, M.*; Wang, C.-W.*; Wang, B.*; Hu, F.*; Kato, Kenichi*; Hattori, Takanori; et al.
Chemistry of Materials, 35(8), p.3249 - 3255, 2023/04
Times Cited Count：1 Percentile：45.8(Chemistry, Physical)Hydrostatic and chemical pressure are efficient stimuli to alter the crystal structure and are commonly used for tuning electronic and magnetic properties in materials science. However, chemical pressure is difficult to quantify and a clear correspondence between these two types of pressure is still lacking. Here, we study intermetallic candidates for a permanent magnet with a negative thermal expansion (NTE). Based on in situ synchrotron X-ray diffraction, negative chemical pressure is revealed in HoFe on Al doping and quantitatively evaluated by using temperature and pressure dependence of unit cell volume. A combination of magnetization and neutron diffraction measurements also allowed one to compare the effect of chemical pressure on magnetic ordering with that of hydrostatic pressure. Intriguingly, pressure can be used to control suppression and enhancement of NTE. Electronic structure calculations indicate that pressure affected the top of the majority band with respect to the Fermi level, which has implications for the magnetic stability, which in turn plays a critical role in modulating magnetism and NTE. This work presents a good example of understanding the effect of pressure and utilizing it to control properties of functional materials.
Collaborative Laboratories for Advanced Decommissioning Science; Tokyo Institute of Technology*
JAEA-Review 2022-053, 89 Pages, 2023/02
JAEA-Review-2022-053.pdf:3.47MB
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2021, this report summarizes the research results of the "Uncertainty reduction of the FPs transport mechanism and debris degradation behavior and evaluation of the reactor contamination of debris state on the basis of the accident progression scenario of Fukushima Daiichi Nuclear Power Station Unit 2 and 3" conducted in FY2021. The present study aims to elucidate the cause of the high dosage under shield plug by clarification of to the cesium behavior of migration, adhesion to structure and deposition as well as evaluate the properties of metal-rich debris predeceasing melted through the materials science approach based on the most probable scenario of accident progression of Unit 2 and 3. In this fiscal year, the followings were achieved.
Collaborative Laboratories for Advanced Decommissioning Science; University of Fukui*
JAEA-Review 2022-046, 108 Pages, 2023/01
JAEA-Review-2022-046.pdf:6.25MB
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2021, this report summarizes the research results of the "Clarification of debris formation conditions on the basis of the sampling data and experimental study using simulated fuel debris and reinforcement of the analytical results of severe accident scenario" conducted in FY2021. The research on fuel debris so far is based on TMI-2 accident that is typical PWR accident but resent scenario analysis of sever accident progression and sampling data of the in reactor materials predict that fuel debris is diversity and piled up complicatedly depending on the unit and in reactor position. We are necessary to presume the thermodynamic condition of fuel debris during the accident in order to estimate accumulation state of debris.
ceramicsVauchy, R.; Hirooka, Shun; Watanabe, Masashi; Yokoyama, Keisuke; Sunaoshi, Takeo*; Yamada, Tadahisa*; Nakamichi, Shinya; Murakami, Tatsutoshi
Ceramics International, 49(2), p.3058 - 3065, 2023/01
Times Cited Count：8 Percentile：77.13(Materials Science, Ceramics)
Rh
Sn
Opletal, P.; Duverger-N
dellec, E.*; Miliyanchuk, K.*; Malick, S.*; Hossain, Z.*; Custers, J.*
Journal of Alloys and Compounds, 927, p.166941_1 - 166941_7, 2022/12
Times Cited Count：3 Percentile：30.25(Chemistry, Physical)Journeau, C.*; Molina, D.*; Brackx, E.*; Berlemont, R.*; Tsubota, Yoichi
Proceedings of International Topical Workshop on Fukushima Decommissioning Research (FDR2022) (Internet), 5 Pages, 2022/10
CEA has manufactured a series of Fukushima Daiichi fuel debris simulants, either with depleted uranium oxide or with hafnium oxide as a surrogate of UO. In ex-vessel compositions resulting from an interaction between corium and concrete, the oxidic phase density becomes lighter than that of the metallic phase, which segregates at the bottom. Three of these metallic phases have been mechanically cut at CEA Cadarache with handsaw and with core boring tool in FUJISAN facility. It appeared that two of these metallic blocks were extremely hard to cut (one from a fabrication with uranium oxide, the other from a simulant block) while the last one was more easily cut. The similarities and differences in metallographic analyses (SEM-EDS and XRD) of these three metal blocks will be presented and discussed. This experience provides useful learnings in view of the cutting and retrieval of fuel debris from Fukushima Daiichi.
Ariyoshi, Gen; Obayashi, Hironari; Sasa, Toshinobu
Journal of Nuclear Science and Technology, 59(9), p.1071 - 1088, 2022/09
Times Cited Count：1 Percentile：29.26(Nuclear Science & Technology)Electromagnetic induction method is one of the effective techniques for local velocity measurement in heavy liquid metals. Ricou and Vives' probe and Von Weissenfluh's probe are famous instrumentations using a permanent magnet. However, sensitivity and measurement volume of the probes show unexpected variation since demagnetization of the magnet is occurred by temperature increase up to the Curie temperature. In this study, electromagnetic probe incorporating a miniature electromagnet was newly developed to overcome such unexpected variation. The diameter and the length of the sensor was 6 mm and 155 mm, respectively. The sensitivity and the measurement volume of the probe were assessed by measurement of local velocity of flowing mercury in a square channel. To clarify the validity for the measured velocity profiles, numerical velocity profiles were calculated and compared with experiment. And the validity for the measured velocity profiles were confirmed by calculated result.
Liss, K.-D.*; Harjo, S.; Kawasaki, Takuro; Aizawa, Kazuya; Xu, P. G.
Journal of Alloys and Compounds, 869, p.159232_1 - 159232_9, 2021/07
Times Cited Count：6 Percentile：46.31(Chemistry, Physical)Kondo, Hiroo*; Kanemura, Takuji*; Park, C. H.*; Oyaizu, Makoto*; Hirakawa, Yasushi; Furukawa, Tomohiro
Fusion Engineering and Design, 146(Part A), p.285 - 288, 2019/09
Times Cited Count：1 Percentile：10.81(Nuclear Science & Technology)Herein, the wall shear stress in a double contraction nozzle has been evaluated experimentally to produce a liquid lithium (Li) target as a beam target for intense fusion neutron sources such as the International Fusion Materials Irradiation Facility (IFMIF), the Advanced Fusion Neutron Source (A-FNS), and the DEMO Oriented Neutron Source (DONES). The boundary layer thickness and wall shear stress are essential physical parameters to understand erosion-corrosion by the high-speed liquid Li flow in the nozzle, which is the key component in producing a stable Li target. Therefore, these parameters were experimentally evaluated using an acrylic mock-up of the target assembly. The velocity distribution in the nozzle was measured by a laser-doppler velocimeter and the momentum thickness along the nozzle wall was calculated using an empirical prediction method. The resulting momentum thickness was used to estimate the variation of the wall shear stress along the nozzle wall. Consequently, the wall shear stress was at the maximum in the second convergent section in front of the nozzle exit.
Futakawa, Masatoshi
Proceedings of 13th International Symposium on Advanced Science and Technology in Experimental Mechanics (13th ISEM'18) (USB Flash Drive), 6 Pages, 2018/10
Issues on the engineering technologies relating to high-power spallation neutron sources with liquid metals are introduced. The present status on research activities and results was reviewed.
Irisawa, Eriko; Kato, Chiaki; Kamoshida, Michio*; Hakamatsuka, Yasuyuki*; Ueno, Fumiyoshi; Yamamoto, Masahiro
Proceedings of European Corrosion Congress 2017 (EUROCORR 2017) and 20th ICC & Process Safety Congress 2017 (USB Flash Drive), 9 Pages, 2017/09
Komiyama, Daisuke; Amaya, Masaki
JAEA-Research 2016-013, 20 Pages, 2016/08
JAEA-Research-2016-013.pdf:6.05MB
The boric acid in the coolant may precipitate on the fuel cladding surface in the case that the blockage of coolant flow path etc. occurs and/or the cooling of fuel becomes insufficient during a LOCA (Loss-Of-Coolant Accident) in PWRs. While there is much knowledge about the compatibility between Zircaloy-4 and boric acid under normal operation conditions, such knowledge under high temperature condition, e.g. LOCA, has not been sufficient. In this study, isothermal heating tests were carried out by using Zircaloy-4 plates with solid boric acid in various atmospheres at up to 900
C; and the stability of boric acid, the reaction between Zircaloy-4 and boric acid and the effect of solid boric acid on the high temperature oxidation behavior of Zircaloy-4 were investigated. From the results obtained, it was suggested that, if boric acid anhydride remained on the surface of Zircaloy-4, the boric acid anhydride prevented the surface of Zircaloy-4 from contacting oxidizing atmosphere and mitigated the high-temperature oxidation of Zircaloy-4. In the case that solid boric acid adhered to the surface of pre-oxidized Zircaloy-4 and they have been heated up to high temperature, it was indicated that the solid boric acid penetrated into the gaps in the pre-oxide layer and the penetrated solid boric acid mitigated the oxidation of Zircaloy-4 thereafter.
Shimada, Michiya; Miyazawa, Junichi*
Purazuma, Kaku Yugo Gakkai-Shi, 92(2), p.119 - 124, 2016/02
Actively convected liquid metal divertor is promising for providing a solution for issues of DEMO reactors including heat removal and disruptions. This chapter gives an overview of the motivation, research history, recent development, future perspective and issues to be resolved.
Irisawa, Eriko; Seki, Masaharu*; Ueno, Fumiyoshi; Kato, Chiaki; Motooka, Takafumi; Abe, Hitoshi
Proceedings of 21st International Conference & Exhibition; Nuclear Fuel Cycle for a Low-Carbon Future (GLOBAL 2015) (USB Flash Drive), p.1108 - 1112, 2015/09
Segawa, Tomoomi; Fukasawa, Tomonori*; Yamada, Yoshikazu; Suzuki, Masahiro; Yoshida, Hideto*; Fukui, Kunihiro*
Proceedings of Asian Pacific Confederation of Chemical Engineering 2015 (APCChE 2015), 8 Pages, 2015/09
A mixed solution of uranyl nitrate and plutonium nitrate is converted to MOX raw powder by the microwave heating de-nitration method in nuclear reprocessing. Copper oxide synthesized by heating de-nitration was used as a model for the de-nitration process. The microwave heating method (MW) and infrared heating method (IR) were used, and how they and their heating rate influence the obtained particle morphology and size were investigated. The particles obtained by the MW and IR were sufficiently similar in the surface morphology and the mass median diameter was decreased by the increased heating rate. The mass median diameters by the MW were the heating rate and smaller than those obtained by IR. The particle size distribution of the particle obtained by the MW was broader than that by the IR. The relationship of the temperature distribution and particle size distribution by the MW was discussed by the numerical simulation.
Irisawa, Eriko; Ueno, Fumiyoshi; Uchida, Naoki; Taguchi, Katsuya
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 3 Pages, 2015/05
Tamura, Itaru; Kashima, Yoichi; Soyama, Kazuhiko
JAEA-Research 2014-029, 12 Pages, 2015/03
JAEA-Research-2014-029.pdf:1.89MB
Neutron guide tubes, which are installed near reactor cores, are damaged by neutrons and 
rays irradiation. Those glass substrates which contain boron material are affected by (n, 
) reaction, and ionization effect of rays on material strength decrease duration of use of neutron guide tubes. In order to increase resistance to radiation, we have fabricated a supermirror with Ni-P metallic substrate. The substrate roughness with 0.2 - 0.3 nm (rms) was produced by super- polishing. The neutron reflectivity reached 76 % for an m=3 supermirror.
-LiAl; Relation to the defect structureSugai, Hiroyuki
Solid State Ionics, 177(39-40), p.3507 - 3512, 2007/01
The diffusion coefficient and its activation energy (116.3 
11.7 kJ/mol) of tritium in an intermetallic compound -LiAl are determined at temperatures from 700 to 848 K. Though the present result for the diffusion coefficient is almost the same as that reported previously, the present result for the activation energy turns out nearly twice of that (64.9 3.8 kJ/mol). The present result for the activation energy is consistent with the systematics that an increase of lithium concentration in Al-Li systems increases the activation energy, but the previous result is not. Furthermore, a consideration of the crystal structure and defect structure suggests that tritium diffuses and is impeded by the attractive interaction with lithium atom at lithium sublattices.
